Table of Contents
Advertisement
4. Troubleshooting
CVBS
(NTSC)
COMP
(720P)
HDMI
(720P)
- Adjustment Specification
White Balance : High light (±3), Low light (±5)
Luminance : High light (±0.1Ft/L), Low light (±0.1Ft/L)
4-8. Servicing Information
4-8-1 USB Download Method
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-
SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will
be possible by connecting a USB drive to the USB port located on your TV.
1.
Insert a USB drive containing the firmware upgrade into the
MEDIA PLAY port on the side of the TV.
2.
Enter the factory mode.
Go to Control → Sub Option, then change "USB Upgrade" from
Off to On.
3.
Pull out power cord from the Set and re-insert.
4.
Power indicator LED Light on.
And in just a few seconds, The light twinkle faster as
time went on.
5.
The SET is automatically ON.
You can watch updated software version that you enter the
factory mode.
Please be careful to not disconnect the power or remove the
USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are
complete. When software is upgraded, video and audio settings
you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can
easily reset them after the upgrade.
4-40
x
y
H/L
272
287
L/L
272
287
H/L
272
287
L/L
272
287
H/L
272
287
L/L
272
287
CA-210
Y(L)
-
(Sub_CT:145)
12.2cd/m
2
(3.52 Ft - Sub_BR:128)
-
(Sub_CT:145)
12.1cd/m
2
(3.5 Ft - Sub_BR:128)
-
(Sub_CT:145)
12.0cd/m
2
(3.5 Ft - Sub_BR:128)
T(K) + MPCD
11,000 (
)
+10
11,000 (
+10
)
11,000 (
)
+10
11,000 (
+10
)
11,000 (
)
+10
11,000 (
+10
)
Advertisement
Table of Contents
