Ejecting The Paper Jammed In The Post Processor Unit Automatically - Ricoh Pro C7500 Operator's Manual

• Open the trimmer front • Hold down lever Rt2
cover. and remove misfed
paper.
• Turn lever Rt1 to the
right, and then remove
misfed paper.
• Return lever Rt1 to its
original position.

Ejecting the Paper Jammed in the Post Processor Unit Automatically

You can specify to eject the jammed paper onto the specified tray automatically, and proceed with
printing when a paper jam occurs in the finisher, booklet finisher, or high-capacity stacker.
1. Press [Printer Adjustment] hub
[Remaining Paper Output Tray When Misfeed Occurs].
On the item with displayed to its left, click
2. Specify [On] on the tray to which you want to eject the jammed paper.
3. Press [OK].
• The jammed paper may not be ejected depending on its condition even if you enable this setting.
• Remove misfed paper
from the trimmer tray.
• Return lever Rt2 to its
original position.
• Close the trimmer front
cover.
03 | [Machine: Paper Feed/Output]
to display its subordinate items.
M0EBPM7385
M0EBPM7386
When Paper Is Jammed
DFG010
0305:
269