Advertisement
Quick Links
Installation Guide
100-240V Redundant Power Supply Module
MCRP100
Panel Layout
Front Panel
Power LED
FAN LED
MCRP100
FAN
LED Explanation
Power
On:
Power on
Off:
Power off
Installation
Remove the protective cover on the power supply module slot of MC1400.
Then gently push in the module and plug it solidly into the connector.
Chassis
Note: MCRP100 only supports TP-Link MC1400 and TP-Link FC1420.
Rear Panel
100-240V~ 50/60Hz 2.5A
AC Power Plug
Power On
Plug the negative connector of the AC power cord into the power socket of
MCRP100, and the positive connector into a power outlet as the following
figure shows. After MCRP100 is powered on normally, the Power LED and
FAN LED indicators on its front panel will keep on.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code
Interface
FAN
On:
The fans are working properly.
Off:
The fans are working abnormally.
© 2023 TP-Link
7106510674 REV2.20.0
Advertisement
Related Manuals for TP-Link Omada MCRP100
Summary of Contents for TP-Link Omada MCRP100
- Page 1 MCRP100, and the positive connector into a power outlet as the following figure shows. After MCRP100 is powered on normally, the Power LED and FAN LED indicators on its front panel will keep on. Chassis Note: MCRP100 only supports TP-Link MC1400 and TP-Link FC1420.
- Page 2 Dangerous voltage We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.