Set Up Instructions - Health O Meter 498KG Manual

SET UP INSTRUCTIONS

Auto-Off Function
As an energy saving feature, the scale will automatically turn off after 2 minutes of inactivity. By default, this
function is enabled.
Disable Auto-Off
1. While the scale is turned off, press and hold the HOLD/RELEASE button.
2. While holding the HOLD/RELEASE button, press the ON/OFF button to turn the scale on.
3. "START" will briefly appear on the display followed by "AOF=0".
4. Auto-off is now disabled and the scale will remain on until the scale is manually turned off.
Enable Auto-Off
1. While the scale is turned off, press and hold the HOLD/RELEASE button.
2. While holding the HOLD/RELEASE button, press the ON/OFF button to turn the scale on.
"START" will briefly appear on the display followed by "AOF=1".
3.
4. Auto-off is now enabled.
To Change Weight Measuring Unit (LB to KG/KG to LB):
Note: LB (Pounds) is the default weight measuring unit upon initial set-up/assembly.
1. Press the ON/OFF button to turn the scale on.
2. Wait for "0.0" LB or "0.0" KG to appear on the display.
3. Press the LB/KG button until the desired unit of measure is displayed.
4. Release the LB/KG button and the scale will operate in the selected mode.
5. Repeat steps 3-4 to change the weighing mode to a different unit of measure.
LB/KG Lock Out
The weight measuring unit can be locked to only measure in KG or LB.
KG Lock Instructions
1. Press the ON/OFF button to turn the scale on. Wait for "0.0" to appear on the display.
2. Press and hold the LB/KG button so that KG icon is displayed and continue holding the LB/KG button for
approximately 10 seconds.
3. When the KG icon flashes, release the LB/KG button. The KG weight measuring unit is now locked and
will remain locked even if the scale is turned off.
LB Lock Instructions
Note: To lock in LB weight mode, you must follow the instructions above to lock in KG weight mode first.
1. Once the scale is locked in KG mode, press and hold the LB/KG button for approximately 10 seconds until
the LB icon flashes.
2. When the LB icon flashes, release the LB/KG button. The LB weight measuring unit is now locked and will
remain locked even if the scale is turned off.
Disabling LB/KG Lock Out
Note: If your scale is locked in KG mode, you must first follow the instructions above to lock into LB mode, and
then begin the disabling instructions below.
1. Press the ON/OFF button to turn the scale on. Wait for "0.0" to appear on the display.
2. Press and hold the LB/KG button until LB and KG icons both flash on the display. When both LB and KG
icons are flashing, release the LB/KG button. The weight measuring unit is now unlocked; pressing the
LB/KG button will allow user to toggle between LB and KG.
70