d.
Pull the suction cups away from each other to slightly separate the panel (2) from the display
rear cover.
e.
On the top left and right sides of the display panel, use tweezers to grasp the ends of the
stretchable tape that is installed under the panel.
f.
While turning the tweezers (1), wrap the tape around the tweezers as you continue to pull the
tape (2) out from behind the display panel.
g.
Lift the panel and place it next to the display rear cover.
h.
Remove the display cable from the clips (1) at the bottom of the display.
i.
Remove the tape (2) from on top of the connector on the back of the display panel.
j.
Lift the locking bar (3).
50
Chapter 5 Removal and replacement procedures for authorized service provider parts