Elkay LZ Series Installation & Use Manual
Bottle filling stations & cooler
Hide thumbs
Also See for LZ Series:
- Installation, care & use manual (30 pages) ,
- Installation & use manual (21 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Quick Links
ENLZS8WS_1G_PIVOT
Enhanced
INSTALLATION & USE MANUAL
LZ
Series Bottle Filling Stations & Coolers
™
Patent zurn-elkay.com/patents
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
Page 1
2000001214 (Rev. B - 01/24)
Advertisement
Table of Contents
Related Manuals for Elkay LZ Series
Summary of Contents for Elkay LZ Series
- Page 1 Enhanced INSTALLATION & USE MANUAL Series Bottle Filling Stations & Coolers ™ Patent zurn-elkay.com/patents WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov Page 1...
- Page 2 ENLZS8WS_1G_PIVOT Fig. 1 2000001214 (Rev. B - 01/24) Page 2...
- Page 3 ENLZS8WS_1G_PIVOT INSTRUCTIONS FOR REMOVING WRAPPER Fig. B(ii) Fig. B(i) 1) Remove the two security screws from the front panel. (see Fig B(i)) NOTE: SCREW THREADS INTO BUSHING WHILE ANGLED. DO NOT ATTEMPT TO THREAD SCREW INTO BUSHING HORIZONTALLY. 2) Gently pull the wrapper down and rotate the wrapper to a downward position (see Fig B(ii)). 3) To remove the wrapper, hold each side and gently pull wrapper up and out of pivoting bracket (see Fig B(iii)).
-
Page 4: Programming Button
7) Plug in unit to restore power. 8) Turn on water supply and flush filter to purge air and fine carbon particles from filter before use. Visit elkay.com/filtration for additional details. Also run water through bottle filler until all air is removed and water flow is clear. - Page 5 ENLZS8WS_1G_PIVOT FIG. 2 FIG. 3 Secure cooler frame to wall by installing (2) screws and washers (not supplied). Fig. 4 Lay gasket along back of bottle filler mounting plate. Align BF and lay on cooler basin. Fig. 5 Attach the 3/8 water line into the bulkhead fitting. (Gasket removed from bottle filler for clarity) Page 5 2000001214 (Rev.
-
Page 6: Wall Mounting Plate
ENLZS8WS_1G_PIVOT Fig. 6 Fig. 7 Connect the bottle fi ller electrical harness. (Gasket removed from bottle fi ller for clarity) MOUNTING BOLT HOLES (6) WALL MOUNTING PLATE Fig. 8 BOTTLE FILLING UNIT 2000001214 (Rev. B - 01/24) Page 6... - Page 7 ENLZS8WS_1G_PIVOT 115V Refrigerated Wiring Diagram with Alpha/Numeric Display LZS8WSSP LZS8WSSP-PF Fig. 9 OPERATION OF QUICK CONNECT FITTINGS OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET TUBE IS SECURED PUSH IN COLLET TUBE TO ATTACH IN POSITION TUBE TO ATTACH...
- Page 8 Do Not Overtighten. 3/8” Water Inlet 1 or 2 Scan for trouble shooting and to sign up for or 3 auto replenishment of authentic Elkay filters. Fig. 13 WATERSENTRY Filter Detail ® WATERSENTRY FILTER PARTS LIST ®...
-
Page 9: Temperature Control
ENLZS8WS_1G_PIVOT Service Instructions Lower and Upper Shroud To access the refrigeration system and plumbing connections, Remove two (2) screws from front of cooler to remove the lower shroud. To remove the upper shroud for access to the pushbars, regulator, solenoid valve or other components located in the top of the unit, remove lower shroud, disconnect drain, remove four screws from tabs along lower edge of upper shroud, unplug two wires and water tube. - Page 10 ENLZS8WS_1G_PIVOT 2000001214 (Rev. B - 01/24) Page 10...
-
Page 11: Error Description
ENLZS8WS_1G_PIVOT Enhanced EZH2O Error Codes Error Error Description Corrective Action Code Bottle filler area obstructed • Remove obstruction. • Clean lens on IR sensor • Unplug unit for at least 30 seconds and restart • If error repeats, replace IR sensor E013 Missing or Incompatible Filter •... -
Page 12: Filter Location
ENLZS8WS_1G_PIVOT Pictured is unit only without bottle filler. Note: Danger! Electrical shock hazard. Disconnect power before serviceing unit. Uses HFC-134A refrigerant Filter Location See Fig. 12 12 or 13 See Fig. 14 21, 24 Fig. 15 2000001214 (Rev. B - 01/24) Page 12... - Page 13 FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.834.4816 REPAIR SERVICE INFORMATION TOLL FREE NUMBER 1.800.260.6640 PRINTED IN U.S.A. • ELKAY MANUFACTURING COMPANY • 1333 BUTTERFIELD ROAD • DOWNERS GROVE, IL 60515 • 630.574.8484 www.elkay.com Page 13 2000001214 (Rev. B - 01/24)