Wiring Diagram - Immergas VICTRIX HYBRID PLUS Manual

TECHNICAL DATA
Key (Fig. 54):
BK - Black
BL - Blue
BR - Brown
G - Green
GY - Grey
OR - Orange
P - Purple
PK - Pink
R - Red
W - White
Y - Yellow
Y/G - Yellow/Green
1 - Virgilio palmtop
2 - Frame earth
3 - 230Vac 50Hz power supply
4 - Configurable relay outlet
5 - Room thermostat 230Vac (Optional)
6 - Victrix Hybrid control panel
7 - Audax.DK4 Outdoor Unit
MAINTENANCE TECHNICIAN
Key (Fig. 54):
A23 - Audax.DK4 Outdoor Unit
A33 - Victrix Hybrid Plus control panel
B1 - Flow probe
B2 - Boiler probe (optional)
B5 - Return probe
B10 - Flue probe
E3 - Ignition and detection electrode
M1 - Outdoor unit circulator
M20 - Fan
M30 - Three-way stepper motor
R8 - Storage tank operation inhibition re-
sistance
S5 - System pressure switch
S20-230VAC - Room thermostat 230 VAC (option-
al)
T1 - Ignition transformer
Y1 - Gas valve
USER
The Storage Tank Unit (if installed) must be connected to termi-
nals 36 and 37 eliminating resistance R8.
The connection of the room thermostat (S20) can only be made by
always keeping the control panel connected with the room sensor
disabled.
The connection to the connection control panel is required for the
hybrid heat pump to operate.
INSTALLER
54