Table of Contents
Advertisement
The temperature detected by the temperature is indicated at the centre of the display on the control panel.
The lower part of the display shows the parameter that can be changed (varies depending on the configuration). You can change the value
by turning the general selector or by using the "Zone Set Point" menu and pressing to confirm the parameter change.
The values that can be found according to the configuration, are:
Room set
Defines the ambient temperature of the zone
Flow set
Defines the system's flow temperature to the zone
Flow offset
Changes the operation curve of the external probe
2.5 COMFORT / ECONOMY / MANUAL OPERATION
Once the calendar is set and the relative association of days is executed, the system operates automatically by switching from "comfort" to
"economy" according to what has been set.
- Comfort (
). During periods in comfort mode, a relative icon appears next to the operation mode.
- Economy (
). During periods in economy mode, a relative icon appears next to the operation mode.
- Manual ( ). If the control panel was set to manage the room temperature of the zone, if required, it is possible to change the value
manually for a determined range.
By using the control panel to manage room temperature, it is possible to turn the main switch to change the room temperature, and press
it to confirm the change. The change is displayed by the symbol " ".
This change remains active until the next time range is changed from the active calendar.
2.6
OPERATION WITH EXTERNAL PROBE
As standard, the system's flow temperature for room central heating is managed by the external probe depending on the external temper-
ature measured.
The operation curve can be changed only by means of the control panel. Operation with external probe can be deactivated as indicated in
Par.3.6.
2.7
CLOCK AND PROGRAMS
From this menu, it is possible to set the system's date and time as well as the time slots for operation in Comfort and Economy mode.
• Date and time.
On first electric supply voltage from the control panel, or in the event of a voltage drop, you must set the date and time. Proceed as fol-
lows.
SETTING DATE AND HOUR
DAY
Date:
24
HOUR
Hour:
15
Cancel
64
Parameter
MONTH
YEAR
Jan
2020
MINUTE
56
Confirm
Configuration (see Parag. 3.6)
Room control interface = P. Rem.
Room control interface = T.A.
Use of external probe = No
Room control interface = T.A.
Use of external probe = Yes
- Press the "Menu" button (Ref. 3 Fig. 42), select by pressing the
general selector switch (Ref. 1 Fig. 42) the entry 'Clock and Pro-
grams', then 'Date and time'.
- Once you have accessed the menu, adjust the various items
highlighted by turning the main switch. Set the value and save
it by pressing the main switch. Each time it is saved, it moves to
the next item.
- When you have finished programming, press the 'Confirm'
button.
44
Advertisement
Table of Contents
