1.8
INSTALLATION INSIDE THE RECESSED FRAME (OPTIONAL)
The appliance is designed to be installed in the Immergas recessed frame (supplied as optional) only coupled with the enlarged door kit.
To install proceed as follows:
- To be installed in the Immergas recessed frame (supplied as optional) only coupled with the enlarged door kit.
- Install the bracket (2) inside the recessed frame fixing it with the screws (3) in the pre-drilled holes (Fig. 5).
- Hang the appliance (4) on the bracket (2) (Fig. 6).
- Block the boiler (4) by mounting the brackets (5) and fixing them with their screws (6) (Fig.7).
The brackets (5) used to centre the appliance on the frame and hold it in place stop against the frame (1) so do not require fixing to the
frame itself.
18
3
5
6
4
2
3
2
4
2
5
6
1
1
1
5
6
7