Related Manuals for Anker SoundCore H30i
Summary of Contents for Anker SoundCore H30i
- Page 1 H30i User Guide (A3012) WEARING CHARGING POWERING ON AND PAIRING MULTIPOINT CONNECTION BUTTON CONTROLS WIRED LISTENING RESET LED LIGHT GUIDE FIRMWARE UPDATE SPECS...
- Page 2 soundcore Google Play and the Google Play logo are trademarks of Google Inc. Apple and the Apple logo are trademarks of Apple Inc. Download the soundcore app to customize EQ settings, update firmware, and explore more. If your headphones cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store. WEARING Wear the headphones with the "L"...
- Page 3 Press and hold the multi-function button for 3 seconds to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore H30i" on your device's Bluetooth list to connect. When pairing, the indicator on the headphones flashes blue slowly. After...
-
Page 4: Multipoint Connection
Manual Pairing PAIRING CONNECTED soundcore H30i To manually enter Bluetooth pairing mode when the headphones are off, press and hold the power button for 5 seconds until the LED flashes blue. MULTIPOINT CONNECTION × 2 PAIRING CONNECTED soundcore H30i The headphones can connect with two devices at the same time. -
Page 5: Button Controls
BUTTON CONTROLS ×1 ×1 ON / OFF ×1 ×1 ×3 Bassup ×2 Power on / off Press and hold for 3 seconds Play / Pause Press once Next track Press and hold for 2 seconds Previous track Press and hold for 2 seconds Volume up Press once Volume down... - Page 6 WIRED LISTENING Play audio on an external device by plugging in the supplied 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode. RESET ×3 You might need to reset your headphones if you experience connectivity or function issues. Delete the pairing history from your Bluetooth device first.
-
Page 7: Firmware Update
LED LIGHT GUIDE Flashing red Flashing blue Steady blue PAIRING Press and hold for 2 seconds CONNECTED FIRMWARE UPDATE You will be informed once the new version of firmware is detected when you connect the headphones with the app. Ensure the headphones are powered on and connected to a device until the firmware update is complete. - Page 8 SPECS Specifications are subject to change without notice. Input 0.78A Output Battery capacity 800mAh Charging time 2 hours Playtime Up to 70 hours Driver size 40mm Frequency response 20Hz - 20kHz Impedance 16Ω Bluetooth version Bluetooth range 15m / 49ft...