Table of Contents
Advertisement
58
INSPECTION AND MAINTENANCE
Item
Steering
Devices
Other parts
ENOM00081-A
Oil level checking
If the oil level is low, or too high, the life of
the engine will be shortened significantly.
1. Stop the engine and set it in a vertical
position.
2. Remove the top cowl.
3. Remove the dipstick after 5 minutes
engine has stopped.
4. Wipe oil off the oil dipstick with a clean
rag.
5. Put in the dipstick.
6. Take out the dipstick and check the oil
level.
7. Return the dipstick.
1
10
1. Filler cap
2. Dipstick
Points to Check
• Check the operation of the steering handle.
• Check if the anode is securely installed.
• Check the anode for corrosion and deformation.
ENOF01222-0
1. Upper level 1200 mL
2. Lower level 1000 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears contam-
inated.
ENOM00082-A
Engine oil replenishing
2
ENOW00079-A
Do not add engine oil of brand and grade
other than existing one. In case engine
oil of other brand or grade is added,
drain all oil and ask dealer for treatment.
In case other than engine oil such as
gasoline is put in the oil chamber, empty
the chamber and ask dealer for treat-
ment.
When replenishing engine oil, be careful
not to allow entry of foreign matters
such as dust and water into oil chamber.
Remedy
Repair
Repair if necessary
Replace
1
2
ENOF00081-0
CAUTION
Advertisement
Table of Contents
