Stopping The Engine - BRP EVINRUDE E15R4 Operator's Manual

42
ENGINE OPERATION
Reverse
1. Quickly pull the control lever to the
Reverse (R) position at 32°, where the
gear is connected, while lifting up on
the lock button located under the con-
trol lever grip.
2. Further rearward motion will open the
throttle.
Acceleration
ENOW00867-A
Sudden acceleration acceleration and
deceleration may cause passenger(s) to be
thrown overboard or falling down.
Open control lever gradually.
7
ENOM00049-A

5. Stopping the engine

ENOW00868-0
Be careful not to remove engine stop
switch lanyard from engine accidentally
while boat is running. Sudden stop of
engine can cause loss of steering control.
It can also cause loss of boat speed, possi-
bly leading the crew(s) and or objects on
the boat to be thrown forward due to iner-
tial force.
CAUTION
N
2
1
ENOF00879-0
WARNING
Tiller handle type
1. Turn the throttle grip to the slow posi-
tion.
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Push the stop switch for a few sec-
onds to stop the engine.
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1
ENOF01107-0
ENOF00314-B