Usb Bracket, System Board - HP Chromebook x360 14 G1 Maintenance And Service Manual

USB bracket, system board

Table 5-12 USB bracket description and part number
Description
USB bracket
Before removing the USB bracket from the system board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
Remove the USB bracket from the system board:
1. Remove the Phillips M2.0 × 4.0 screw (1) that secures the USB bracket to the system board.
2. Remove the bracket from the system board (2).
Reverse this procedure to install the USB bracket onto the system board.
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page 22).
Fan on page 25).
System board on page
20).
20).
36).
Component replacement procedures
Spare part number
L36909-001
39