Related Manuals for TP-Link TAPO A200
Summary of Contents for TP-Link TAPO A200
- Page 1 Installation Guide Tapo Solar Panel *Images may differ from your actual products. © 2023 TP-Link 1910013456...
- Page 2 Position the Solar Panel Note: The position and tilt angle of the solar panel greatly affects solar efficiency. 1. Choose a location where the solar panel gets the most sunlight throughout the year. 2. Position the panel south-facing in the Northern Hemisphere or north-facing in the Southern Hemisphere.
- Page 3 Mount the Solar Panel 1. Detach Bracket 2. Install Adjustable Bracket Loosen the adjustable Install the adjustable screw to detach the bracket on the back of mounting bracket and the solar panel and adjustable bracket. tighten the fixing screw. 3. Drill Holes 4.
- Page 4 5. Install Solar Panel Install the solar panel on the mounting bracket, rotate the adjustable screw but keep it loose, tilt the solar panel to adjust the angle, then tighten the adjustable screw. To optimize your solar panel efficiency: 1. Mount the solar panel south-facing in the Northern Hemisphere or north-facing in the Southern Hemisphere.
- Page 5 Connect the Solar Panel to Your Tapo Device 1. Slide the waterproof gasket onto the USB connector of the solar panel cable. 2. Plug the USB connector into the USB port of your Tapo device for charging. Note: Images may differ from your actual products. If the USB port of your Tapo device is against the wall, please move the device for easier access, then return it.