Turning on and off hearing aids
You have the following options to turn your hearing aids on or off.
Turning on: Take the aids out of the charger.
X
The startup melody is played in your hearing aids. The default
volume and hearing program are set.
Turning off: Place the hearing aids in the charger.
X
Note that the charger must be on.
22
Switching to standby mode
Via remote control, you can switch your hearing aids to standby
mode. This mutes the hearing aids. When you leave standby mode,
the previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off completely.
They draw some power.
Therefore we recommend to use standby mode only for a short
period of time.
●
If you want to leave standby mode, but the remote control is
not at hand: Turn your hearing aids off and on again (by shortly
placing them in the charger until one or more LEDs light up).
Wait until the startup melody is played in your hearing aids. This
may take several seconds. Note that the default volume and
hearing program are set.
23