Pairing The Tv To The Samsung Smart Remote; Installing Batteries Into The Samsung Smart Remote - Samsung QN65LST9TAFXZA User Manual

Pairing the TV to the Samsung Smart Remote

Installing batteries into the Samsung Smart Remote

1
1. Press the button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body cover.
2. Turn the remote over, push the body of the remote upwards until the battery compartment is revealed, and then remove the battery
cover.
3. If there are batteries in the remote, to remove the existing batteries.
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries' polarities (+, -) are oriented
correctly.
5. Once the batteries have been inserted, attach the battery cover and then slide down the body of the remote.
6. Turn the remote over, press and hold the
• Alkaline batteries are recommended for longer battery life.
English - 16
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV
automatically. If the Samsung Smart Remote does not pair to the TV automatically, point it at
the remote control sensor of the TV, and then press and hold the buttons labeled
as shown in the figure on the left simultaneously for 3 seconds or more.
3
2
button on the top rear, and then slide the body of the remote down into place.
and
3
1
2