TP-Link Deco X80-5G V1 Quick Installation Manual

Quick Installation Guide
Getting Started
Download the TP-Link Deco app for iOS or Android. The app will walk you through the
setup.
LED Status
Each Deco has an LED light that changes color according to its status. See the
explanation below.
LED
Pulse Yellow
Solid Yellow
Pulse Blue
Solid Blue
Pulse Green
Solid Green
Solid Purple
Pulse Red
Solid Red
Need Help?
For answers to frequently asked questions (FAQs) and technical support, please go to
https://www.tp-link.com
Alternatively, log into the Deco app and select
Safety Information
• Adapters should be installed near the equipment and should be easily accessible.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
• Do not use damaged power adapter to charge the device.
• Do not use any other power adapters than those recommended.
• Do not use the device where wireless devices are not allowed.
• Use only power adapters which are provided by manufacturer and in the original packing
of this product. If you have any questions, please don't hesitate to contact us.
Please read and follow the above safety information when operating the device. We
cannot guarantee that no accidents or damage will occur due to improper use of the
device. Please use this product with care and operate at your own risk.
Deco Status
Deco is resetting.
Deco is starting up.
Deco is ready for setup, or WPS is in progress.
Deco is setting up.
Deco is upgrading firmware.
Deco is all set up and connected to 4G / WAN.
Deco is all set up and connected to 5G.
The satellite Deco is disconnected from the main Deco.
Deco has an issue.
and navigate to the Support page.
?Help from the menu in the top left corner.
© 2021 TP-Link 7106509354 REV1.0.0