1. Manuals
  2. Brands
  3. Strongway Manuals
  4. Jacks
  5. 113239
  6. Owner's manual

Strongway 113239 Owner's Manual

3-ton hydraulic long reach professional floor jack
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LONG REACH PROFESSIONAL
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
3-TON HYDRAULIC
FLOOR JACK
OWNER'S MANUAL
Item# 113239

Advertisement

Table of Contents
loading

Related Manuals for Strongway 113239

Summary of Contents for Strongway 113239

  • Page 1 3-TON HYDRAULIC LONG REACH PROFESSIONAL FLOOR JACK OWNER’S MANUAL Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 113239...

  • Page 2: Technical Specifications

    Lifting Range Item Capacity Min. (inch) Max. (inch) Min. (cm) Max. (cm) 113239 3 TON 3.35 SAFETY MARKINGS WARNING! 1. Study, understand, and follow all instructions before operating this device. 2. Do not exceed rated capacity. 3. Use only on hard, level surfaces, with less than 3 degrees of slope.
  • Page 3 ASSEMBLY 3. Refer to picture 2 when performing this step. 1. Familiarize yourself with the jack. Press Quick Disconnect on handle piece 2, this will allow slide handle pieces 1 and 2 connect, align the holes on both sections to allow quick Lifting Arm disconnect to trigger.

  • Page 4: Operation

    SYSTEM AIR PURGE PROCEDURE OPERATION IMPORTANT: BEFORE FIRST USE RAISING THE JACK Perform the following System Air Purge Procedure to 1. Block the vehicle’s wheels for lifting stability. remove any air that may have been introduced into Secure the load to prevent inadvertent shifting the hydraulic system as a result of product shipment and movement and handling.

  • Page 5: Maintenance Instructions

    MAINTENANCE INSTRUCTIONS If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. Inspection You should inspect the product for damage, wear, broken or missing parts (e.g.: pins) and that all components function before each use.
  • Page 6 7. Replace oil plug. TO ADD JACK OIL 8. Replace the cover plate and perform the System Air Purge Procedure. 1. Position the jack on level ground and lower the saddle. 2. Remove cover plate. ADDITIONAL WARNINGS: 3. Remove the oil plug. •...

  • Page 7: Assembly Diagram

    ASSEMBLY DIAGRAM...
  • Page 8 REF# PART# DESCRIPTION TZ830009.3 Power unit assembly T830008.5-1 Universal joint assembly GB/T 308 Steel ball bearing Ø6mm T815016L.3-13(ASM) Oil plug Cotter pin Ø4x45mm Coupling connector Lifting arm assembly T830003L-16 Pin for saddle TZ830026X-GS-1 Saddle GB/T 894.1 C-clip Ø18mm Connected bar T84004-3 Front wheel GB/T 896...

  • Page 9: Troubleshooting

    TROUBLESHOOTING JACK JACK JACK WILL NOT WILL WILL POOR WILL LIFT TO JACK CAUSES AND SOLUTIONS FULL LIFT HOLD LIFTING LOWER EXTENSION LOAD LOAD Release valve is not completely closed. Turn handle clockwise. Weight Capacity Exceeded. Decrease the weight or change to a higher capacity jack.

  • Page 10: Limited Warranty

    Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.

Table of Contents