Table of Contents
Advertisement
+
-
RESET
INFO
+
-
RESET
INFO
+
-
RESET
INFO
Under these conditions, the combustion value (CO
tion (Ac) and minimum ignition (Mi) can be measured
92
+
-
MODE
63
+
-
MODE
64
+
-
MODE
65
) related to the delivery of maximum rated power (MA), intermediate igni-
2
Once in the menu, press INFO until the flashing "tM" appears.
Confirm by pressing MODE.
Once the function is activated, the service symbol (
flashing. The digits on the left will display "tM" while those on the
right will display the flow temperature alternating with the indi-
cation (MA, AC, Mi) of the current phase.
The flashing (
) or (
) symbols indicate on which circuit the
energy produced during calibration is being dissipated.
Once the boiler is switched on, the symbol (
ing.
Pressing the Reset button allows you to exit the function in ad-
vance.
Once the system has stabilised and reached the flame set for the
current phase, the symbol (
the right digit.
) will start
) will appear flash-
) becomes fixed and "0" appears on
Advertisement
Table of Contents
