Table of Contents
Advertisement
+
-
RESET
INFO
+
-
RESET
INFO
The calibration function ends automatically by returning the appliance to the state it was in before it was activated.
No interaction with the device is necessary: the function is fully automatic.
90
+
-
MODE
59
+
-
MODE
60
Once the function is activated, 'tA' and 'MA/AC/Mi' plus the sym-
bol (
) flashing on the screen will then appear.
Once the function is activated, the service symbol (
flashing. The digits on the left will display "tA" while those on the
right will display the flow temperature alternating with the indi-
cation (MA, AC, Mi) of the current phase, depending on the pro-
gress of the calibration. The flashing (
cate on which circuit the energy produced during calibration is
being dissipated. Pressing the Reset button allows you to exit the
function in advance.
) will start
) or (
) symbols indi-
Advertisement
Table of Contents
