Table of Contents
Advertisement
Error
Anomaly signalled
Code
96
Clogged flue
Timed
97
Service operation
request warning
Block - maximum no.
98
of software errors
Screed heater in
138
progress
Deaeration in
139
progress
System pressure too
146
high
(1) If the shutdown or fault persists, contact an authorised company (e.g. Authorised Service Centre)
(2) The anomaly can only be verified in the list of errors in the "Information" menu
(3) Error displayed only on CAR
(4) Error displayed only on Anomalies log
74
This occurs in the event an obstruction is detected in the
flue system.
The time range envisaged by the Assistance Centre for
scheduled maintenance has expired.
The maximum number of software errors possible has been
reached.
Signalling to remote screed heater function devices (except
CAR
).
V2
Signalling to remote venting function devices (except
CAR
).
V2
The system pressure sensor has detected very high pres-
sure.
V2
Cause
Appliance status / Solution
The appliance does not start (1). If
normal conditions are restored the
boiler restarts without having to be
reset
If error 96 appears after the Techni-
cian has made changes on the "flue"
parameters, it is necessary to perform
a "quick calibration".
Error only displayed on remote device
(if present) (1)
Press the Reset button (1)
(1)
(1)
The boiler keeps working (1) (2)
Advertisement
Table of Contents
