Table of Contents
Advertisement
(A)
(B)
The function lasts in total 7 days, 3 days at the lower temperature set and 4 days at the higher temperature set (Fig. 79).
When the function is active, the current flow temperature is displayed (read by the flow probe) alternating with the countdown of the days
remaining until the end (7, 6, 5, etc.). In addition, the symbol
(indicating the possible forced termination of the function by pressing the RESET button) are displayed in flashing mode.
In case of failure or lack of supply voltage, the function is suspended and will resume when the normal operating conditions are reset
from the point where it was interrupted.
When the time expires, the boiler automatically goes back to "Stand-by" mode, the function can also be stopped by pressing the "RESET".
108
Key (Fig. 79):
(A)
- Top set
(B)
- Lower set
(C)
- Days
TM - Flow temperature
(C)
79
(indicating the disposal of heat to the heating system) and the symbol
Advertisement
Table of Contents
