TP-Link TL-WPA1000 Quick Installation Manual

Quick Installation Guide
* European version is used for demonstration in this guide.
* Images may differ from actual products.
Plug and Play
e
r l i n
w e
P o
N
L A
N
W A
Router
1
Plug the adapter into a power outlet
and connect it to the router's LAN
Adapter
port via an Ethernet cable.
TL-PA7017
2
Plug the extender into a power outlet on the same service panel.
Wait until the extender's Powerline LED
Note: If the LED is off, please refer to FAQ > Q2.
3
Connect your devices to the internet using the default SSID (network
name) and password on the label at the top of the extender.
Extender
On
Attention
1. Use the product only in the upright direction.
2. Plug powerline devices into wall outlets instead of power strips.
Note: Using power strip will affect network performance or even cause connection drops.
Wall Outlet
turns on.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
Tip:
Want to unify or personalize your network? See the back
page for instructions.
Power Strip