Security Requirements; Security Functional Requirements; Class Fau: Security Audit; Table 4: List Of Auditable Events - Ricoh Gestetner MP 4001 Manual

6 Security Requirements

This section describes the security functional requirements, security assurance requirements, and security
requirements rationale.
6.1

Security Functional Requirements

This section describes the TOE security functional requirements for fulfilling the security objectives
defined in "4.1 Security Objectives for TOE". The security functional requirements are quoted from the
requirement defined in the CC Part2.
The part with assignment and selection defined in the CC Part2 are identified with [ b old face and
brackets].
6.1.1

Class FAU: Security audit

FAU_GEN.1 Audit data generation
Hierarchical to:
Dependencies:
FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events:
a) Start-up and shutdown of the Audit Functions;
b) All auditable events for the [selection: not specified] level of audit; and
c) [assignment: auditable events of the TOE shown in Table 4].
Table 4 shows the actions (CC rules) recommended by the CC as auditable for each functional requirement
the corresponding auditable events of the TOE.
Functional requirements
FAU_GEN.1
FAU_SAR.1
FAU_SAR.2
FAU_STG.1
FAU_STG.4
FCS_CKM.1
Copyright (c) 2010 RICOH COMPANY, LTD. All Rights Reserved.
No other components.
FPT_STM.1 Reliable time stamps.

Table 4: List of auditable events

Actions which should be auditable
None
a) Basic: Reading of information from
the audit records.
a) Basic: Unsuccessful attempts to
read information from the audit
records.
None
a) Basic: Actions taken due to the
audit storage failure.
a) Minimal: Success and failure of the
activity.
b) Basic: The object attribute(s), and
Page 34 of 81
Auditable events of TOE
-
Auditable events not recorded.
Auditable events not recorded.
-
Auditable events not recorded.
<Individually-defined auditable
events>
1. HDD cryptographic key