Replacing An Inverter - SolarEdge SE8000H-AU Installation Manual

Replacing an Inverter

1. Turn OFF the inverter ON/OFF switch, and wait until the LCD indicates that the DC voltage is safe
(<50V), or wait five minutes before continuing to the next step.
WARNING!
If you cannot see the inverter panel, or if a malfunction is indicated on the LCD panel, wait five
minutes for the input capacitors of the inverter to discharge.
2. Disconnect the AC to the inverter by turning O FF the AC circuit breaker of the distribution panel.
3. Open the inverter cover as described in Removing the Inverter Cover on page 46.
4. Disconnect the DC plugs from the inverter.
5. Disconnect the AC wires from the AC terminal block and remove the f errite bead.
Single Phase Inverter with HD-Wave Technology Installation MAN-01-250-1.2
Appendix C: Replacing and Adding System Components
Figure 28: AC connections
65