Pre-Installation Cutout And Required Clearances; Standard Installation - GE P2S975 Installation Instructions Manual

Installation Instructions
PRE-INSTALLATION CUTOUT
AND REQUIRED CLEARANCES
(FOR INDOOR USE ONLY)
if cabinets are placed less than 30" above the
range, see Alternate Construction, Step 25D,
on page 15.
Wall coverings, counters and cabinets around
range must withstand heat (up to 194°F)
generated by the range.
OVERALL DEPTH" |
70 cm (27-1/2")
\-<7 —~__ 79,
Min.
ote walls
mum
t optim se
frtatiation T°
aces
Surat & Level
Be
[9] STANDARD INSTALLATION
if the construction of your cabinet cannot
provide a 1/4" flat area at the back of the
countertop opening, consider changing the
countertop to accommodate this dimension.
See Alternate Construction section.
NOTE: A 1-1/2" minimum clearance must
be maintained between the rear edge of the
cooktop and the rear wall above the cooktop.
Z
Flat area Back
Front m7 A
26"
1/4" —> «&— >
a
Floor
Wall _
\
| ¥
—=—_— ee ee eee
4 i
1/4" min.
flat
23-3/16" | 25"
typically | | typically
9/16" |
ong"
min, —»! be— —|'<— min.
flat | | flat
ae ee r v Ya ee _
«__—— 29-15/16"-30-1/16" ——_~+
smooth cut