Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
5.
Disconnect the battery.
Remove the power button board:
1.
Disconnect the power button board cable (1) from the system board.
2.
Remove the Phillips PM2.5×4.0 screw (2) that secures the power button board to the computer.
Top cover on page
28).
Spare part number
774599-001
Component replacement procedures
45
Advertisement
Table of Contents
