Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
5.
Disconnect the battery.
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Remove the cable from clips built into chassis (2).
3.
Remove the two Phillips PM2.5×4.0 screws (3) that secure the speakers to the computer.
40
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top cover on page
28).
Spare part number
774605-001
Advertisement
Table of Contents
