Table of Contents
Advertisement
12.
To remove the camera cable, disconnect the cable (1) from the camera module, peel the cable off
the inside of the display back cover (2), and then remove the cable from the clips (3) along the
bottom of the display back cover.
13.
Release the wireless antenna cables from the retention clips and routing channels (1) built into the
sides and bottom of the display back cover, and then peel the foil that holds the wireless antennas
(2) off the display back cover.
The wireless cables and antennas are available as spare part number N60123-001.
To reassemble and replace the display assembly, reverse this procedure.
Top cover with keyboard
The top cover with keyboard remains after removing all other spare parts from the computer.
50
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
