Table of Contents
Advertisement
c.
Rotate the display panel over and place it next to the display enclosure.
NOTE:
Display adhesive is available as spare part number N60157-001.
The display panel is available spare part number N60118-001.
d.
Release the adhesive support strip (1) that secures the display panel cable connector to the
display panel.
e.
Open the locking lever (2) on the connector.
f.
Disconnect the display panel cable (3) from the display panel.
10.
To remove the hinges from the display rear cover:
a.
Remove the three Phillips M2.0 × 2.5 broadhead screws (1) and Phillips M2.0 × 2.0 screw (2) from
each hinge.
b.
Remove the hinges (3) from the display back cover.
The display hinges are available as spare part number N60130-001.
48
Chapter 5 Removal and replacement procedures for authorized service provider parts
Pull the tape out slowly and evenly to prevent it from breaking prematurely.
Advertisement
Table of Contents
