Table of Contents
Advertisement
c.
Lift the cable (3) off the display rear cover.
The camera module is available as spare part number N84266-001.
6.
To remove the headset antenna:
a.
Remove the two Phillips M2.0 ×2.5 screws (1) from the antenna.
b.
Remove the antenna (2).
c.
Remove the antenna cables from the clips (3) along the bottom of the display rear cover.
d.
Remove the rubber piece (4) from the hinge cover.
e.
Remove the antenna cable (5) from the hinge.
The headset antenna is available as part of the wireless antenna kit as spare part number
N84241-001.
Display assembly
53
Advertisement
Table of Contents
