Table 5-11
IR board description and part number
Description
IR board sensor board
IR board cable
Before removing the IR board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the fans (see
5.
Remove the WLAN module (see
6.
Remove the system board (see
Remove the IR board:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the board to the computer.
2.
Lift the board (2)up to access the cable underneath.
3.
Disconnect the cable (3) from the board.
To install the IR board, reverse this procedure.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
Preparation for disassembly on page
Bottom cover on page
Battery on page
31).
Fans on page
37).
WLAN module on page
System board on page
30).
43).
46).
Spare part number
N84259-001
N84248-001
30).
Display assembly
49