c.
Lift the cable (3) off the display rear cover.
The camera module is available as spare part number N84266-001.
To install the display components with the display attached to the computer, reverse these procedures.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-3
Solid-state drive descriptions and part numbers
Description
2 TB, TLC
2 TB, TLC (only for use in China)
1 TB, TLC
1 TB, TLC (only for use in China)
512 GB, TLC
Solid-state drive thermal pad
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 3.0 screw (1) that secures the solid-state drive cover.
2.
Lift the cover (2) off the drive.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
30).
Spare part number
M52027-001
N77396-001
M16560-001
N77395-001
M17436-001
N84256-001
Battery on page
31).
30).