Immergas MAGIS PRO 12 V2 Instructions And Recommendations page 8

The appliance operates with R410A refrigerant gas.
This gas is ODOURLESS.
Pay the utmost attention
Strictly follow the instruction handbook of the outdoor unit before installation and any type
of operation on the chiller line.
The manufacturer declines all liability in the event of damage caused by appliances removed from other systems or for any
non-conformities with such equipment.
Only a professionally enabled company is authorised to install Immergas appliances.
Check the environmental operating conditions of all parts relevant to installation, referring to this booklet.
If installing a kit or servicing the appliance, always empty the system's circuit first so as not to compromise the appliance's elec-
trical safety (Parag. 2.9).
Always disconnect the appliance from voltage and, depending on the type of operation, decrease the pressure and/or bring it to
zero in the system circuit.
Before installing the appliance, ensure that it is delivered in perfect condition; if in doubt, contact the supplier immediately.
Packing materials (staples, nails, plastic bags, polystyrene foam, etc.) constitute a hazard and must be kept out of the reach of
children.
If the appliance is installed inside or between cabinets, ensure sufficient space for routine servicing; for minimum installation
distances, see Fig. 4.
Keep all flammable objects away from the appliance (paper, rags, plastic, polystyrene, etc.).
For the aforementioned reasons, we recommend not placing furnishings, furniture, etc. under the indoor unit.
Any modification to the appliance that is not explicitly indicated in this section of the booklet is forbidden.
8
OK
1