Using a Zone Remote Panel with firmware version 2.00 or higher, it is possible to:
- edit the DHW setpoint;
- read the domestic hot water temperature;
- remotely reset the errors that appear;
- set the flow setpoint and offset from the Zone Setpoint Menu;
- set Eco, Comfort and manual DHW (Domestic hot water) setpoint from the DHW (Domestic hot water) Setpoint Menu;
- enable and configure the DHW time slots;
- read information on flow and return of the enabled generators;
- set the minimum central heating setpoint.
The parameters that are not managed by the appliance will be displayed on the Zone Remote Panel with the symbol "--".
51