General Recommendations - Immergas MAGIS PRO 12 V2 Instructions And Recommendations

This book contains important information for the:
Installer (section 1);
User (section 2);
Maintenance Technician (section 3).
For instructions on the UE AUDAX PRO V2 outdoor condensing unit, please refer to the relevant instruction manual;
• The user must carefully read the instructions in the specific section (section 2).
• The user must limit operations on the appliance only to those explicitly allowed in the specific section.
• Every operation carried out on the heat pump (e.g. set up, inspection, installation and commissioning), must mandato-
rily be performed by authorised personnel alone and in possession of a technical engineering or professional degree
qualifying them to perform these tasks. They must also have attended a refresher course acknowledged by competent
authorities. This particularly applies to personal specialised in C.H. and air-conditioning systems and qualified electri-
cians who, due to their specialised training, skills and experience are experts in the correct installation and mainte-
nance of C.H., cooling and air-conditioning systems.
• The appliance must be installed by qualified and professionally trained personnel.
• The instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer
or succession of ownership.
• It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installa-
tion, use and maintenance stages.
• In compliance with the legislation in force, the systems must be designed by qualified professionals, within the dimensional
limits established by the Law. Installation and maintenance must be performed in compliance with the regulations in force,
according to the manufacturer's instructions and by professionally qualified staff, meaning staff with specific technical skills
in the plant sector, as provided for by Law.
• Improper installation or assembly of the Immergas device and/or components, accessories, kits and devices can cause unex-
pected problems for people, animals and objects. Read the instructions provided with the product carefully to ensure proper
installation.
• This instructions manual provides technical information for installing Immergas products. As for the other issues related to
the installation of products (e.g. safety at the workplace, environmental protection, accident prevention), it is necessary to
comply with the provisions of the standards in force and the principles of good practice.
• All Immergas products are protected with suitable transport packaging.
• The material must be stored in a dry place protected from the weather.
• Damaged products must not be installed.
• Maintenance must be carried out by skilled technical staff. For example, the Authorised Service Centre that represents a
guarantee of qualifications and professionalism.
• The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered
improper and therefore potentially dangerous.
• If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, stand-
ards or instructions contained in this booklet (or however supplied by the manufacturer), the manufacturer is excluded from
any contractual and extra-contractual liability for any damages and the device warranty is invalidated.
• In the event of malfunctions, faults or incorrect operation, turn the appliance off and contact an authorised company (e.g. the
Authorised Technical Assistance Centre, which has specifically trained staff and original spare parts). Do not attempt to
modify or repair the appliance alone.

GENERAL RECOMMENDATIONS

5