Immergas MAGIS PRO 12 V2 Instructions And Recommendations page 48

User Menu.
Parameter
ID
U 01 Zone 2 heating flow set point in case of no thermal regulation ("R 01" = OFF).
U 02 Zone 2 cooling flow set point in case of no thermal regulation ("R 01" = OFF)
U 03 Zone 1 central heating offset
U 04 Zone 2 central heating offset
U 05 Zone 1 cooling offset
U 06 Zone 2 cooling offset
U 07 Zone 1 humidity setting
U 08 Zone 2 humidity setting
U 11 Night function
U 12 Night function enabling time
U 13 Night function disabling time
U 14 Zone 3 heating flow set point in case of no thermal regulation ("R 01" = OFF).
U 15 Zone 3 cooling flow set point in case of no thermal regulation ("R 01" = OFF)
U 16 Zone 3 central heating offset.
U 17 Zone 3 cooling offset.
U 18 Zone 3 humidity setting.
48
Description
It is possible to correct the flow temperature with
respect to the adjustment curve of the external
probe in central heating mode (Parag. 1.16, Offset
value)
The flow temperature with respect to the adjust-
ment curve of the external probe in cooling mode
can be corrected (Parag. 1.16, Offset value)
The humidity temperature sensor (optional) de-
fines room humidity in the corresponding area
Activating the function allows you to reduce the
compressor frequency during the outdoor unit
operation in the time slot set in the U 12 and U 13
parameters.
Make sure the additional power sources needed to
meet potential requirements that may present
themselves during active operation are available
(e.g. additional resistances)
It is possible to correct the flow temperature with
respect to the adjustment curve of the external
probe in central heating mode (Parag. 1.16, Offset
value)
The humidity temperature sensor (optional) de-
fines room humidity in the corresponding area
Range Default
20 ÷ 55 °C 25
5 ÷ 25 °C 20
- 15 ÷ + 15 °C 0
- 15 ÷ + 15 °C 0
- 15 ÷ + 15 °C 0
- 15 ÷ + 15 °C 0
30 ÷ 70 % 50
30 ÷ 70 % 50
OFF - ON OFF
0 ÷ 23 0
0 ÷ 23 0
20 ÷ 55 °C 25
5 ÷ 25 ° C 20
- 15 ÷ + 15 °C 0
- 15 ÷ + 15 °C 0
30 ÷ 70 50
Customised
value