1.6
INDOOR UNIT CONNECTION UNIT
- The hydraulic connection unit is supplied as per standard with Magis Pro V2. Make the hydraulic connection as shown below, making
sure to protect the system flow and return pipes with their supplied insulating sheaths.
- The R410A circuit wall connection unit is supplied as an extra kit. Connect the circuit, following the instructions provided in the out-
door unit instructions booklet.
14
The hydraulic connection kit includes (Fig. 5):
N°1 - Adjustable expansion bolts
N°2 - Indoor unit support hooks
N°1 - G 1" storage tank unit return pipe (RU)
N°1 - G 1" storage tank unit flow pipe (MU)
N°1 - G 1/2" system filling pipe (RR)
N°1 - G 1/2" ball valve (RR)
N°1 - G 1" system return pipe (R)
N°1 - G 1" system flow pipe (M)
N°1 - G 1" ball valve (M)
N°2 - Insulating sheath for system pipes (R - M)
N°4 - G 1" telescopic fittings (RU - MU - R)
Gaskets, screws and seal O-Ring
The R32 circuit wall connection kit (optional) includes:
N°1 - SAE 3/8" liquid phase chiller line pipe (LP)
N°1 - SAE 5/8" gaseous phase chiller line pipe (GP)
Already installed on the module:
N°1 - System shut-off cock with G 1" filter (R)
5