Advertisement
Quick Links
EZSG8WS*1B
LZSG8WS*1B
Buy at
| 855-558-9600 | BottleFillingStations.com
INSTALLATION, CARE & USE MANUAL
Manual de Instalación, Cuidado y Utilización
Manuel d'installation/entretien/utilisation
EZ & LZ Series Bottle Filling Stations & Coolers
TM
TM
EZ & LZ
Serie Botella Bombas y Enfriadores
TM
TM
EZ & LZ
Stations de Remplissage de Bouteille Série et Refroidisseurs
TM
TM
Page 1
1000001713 (Rev. E 06/16)
Advertisement
Related Manuals for Elkay EL Series
Summary of Contents for Elkay EL Series
- Page 1 EZSG8WS*1B LZSG8WS*1B Buy at | 855-558-9600 | BottleFillingStations.com INSTALLATION, CARE & USE MANUAL Manual de Instalación, Cuidado y Utilización Manuel d’installation/entretien/utilisation EZ & LZ Series Bottle Filling Stations & Coolers EZ & LZ Serie Botella Bombas y Enfriadores EZ & LZ Stations de Remplissage de Bouteille Série et Refroidisseurs Page 1 1000001713 (Rev.
- Page 2 Buy at | 855-558-9600 | BottleFillingStations.com Note: Danger! Electric shock hazard. Disconnect power before servicing unit. Nota: peligro! Peligro de descarga eléctrica. Desconecte antes de reparar la unidad. Remarque : Danger ! Risque d'électrocution. Débrancher avant de réparer l'appareil. Pictured is unit only without bottle filler. En la foto, la unidad sólo sin relleno botella.
- Page 3 Buy at | 855-558-9600 | BottleFillingStations.com Fig. 2 Page 3 1000001713 (Rev. E 06/16)
-
Page 4: Entretien
Buy at | 855-558-9600 | BottleFillingStations.com HANGER BRACKETS & TRAP INSTALACIÓN DE LOS SOPORTES INSTALLATION DES SUPPORTS INSTALLATION FIJADORES Y EL PURGADOR DE SUSPENSION ET DU SIPHON 1) Remove hanger bracket fastened to back of Retire el soporte fijador que se encuentra conectad 1) Retirez le support de suspension fixé... - Page 5 Buy at | 855-558-9600 | BottleFillingStations.com Service Instructions Lower and Upper Shroud To access the refrigeration system and plumbing connections, remove four screws from bottom of cooler to remove the lower shroud. To remove the upper shroud for access to the pushbars, regulator, solenoid valve or other components located in the top of the unit, remove lower shroud, disconnect drain, remove four screws from tabs along lower edge of upper shroud, unplug two wires and water tube.
- Page 6 Buy at | 855-558-9600 | BottleFillingStations.com 7/16” BOLT HOLES FOR MOUNTING FASTENING UNIT TO WALL TOP COVER SCREWS UNIT CENTER LINE Fig. 4 Fig. 5 BRACKET, WASHERS, Fig. 7 Fig. 6 & SCREWS Bottle Filler Installation Instructions 1) Remove two (2) mounting screws with 5/32” Allen wrench holding top cover to Bottle Filler (See Fig. 5). Remove top cover. Note do not discard mounting screws, they will be needed to reinstall top cover.
- Page 7 Buy at | 855-558-9600 | BottleFillingStations.com BF11 - BF12 PROGRAM SETTING THE CONTROL BOARD VERIFY CONTROL BOARD SOFTWARE Continued from below: 1) To verify the software program of the control board the unit will 2) When the display changes to “SETTINGS”, depress the button again. need to be shut down and restarted.
-
Page 8: Cleaning The Strainer
Buy at | 855-558-9600 | BottleFillingStations.com NOTE: When installing replacement bubbler and pedestal, tighten nut only to hold parts snug in position. Do Not Overtighten. NOTA: Al instalar el grifo y pedestal de reemplazo, apriete la tuerca unicamente para mantener las piezas en una Basin posicion adjustada. - Page 9 Buy at | 855-558-9600 | BottleFillingStations.com OPERATION OF QUICK CONNECT FITTINGS OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET TUBE IS SECURED PUSH IN COLLET TUBE TO ATTACH IN POSITION TO RELEASE TUBE TUBE TO ATTACH IN POSITION TO RELEASE TUBE...
- Page 10 POUR OBTENIR DES PIÈCES, CONTACTEZ VOTRE DISTRIBUTEUR LOCAL OU COMPOSEZ LE 1.800.834.4816 PRINTED IN U.S.A. IMPRESO EN LOS E.E.U.U. ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 IMPRIMÉ AUX É.-U. 1000001713 (Rev. E - 06/16)