Reporting And Monitoring Installation Data - SolarEdge SE330K Installation Manual

Reporting and Monitoring Installation Data

Monitoring the site requires connecting the inverter to the monitoring platform, using
any of the wired or wireless options available from SolarEdge.
The Monitoring Platform
The monitoring platform provides enhanced PV performance monitoring and inverter
yield assurance through immediate fault detection and alerts at the module, PV array
and system level.
Using the platform, you can:
View the latest performance of specific components.
Find under-performing components, such as modules, by comparing their
performance to that of other components of the same type.
Pinpoint the location of alerted components using the physical layout.
The monitoring platform enables accessing site information, including up-to-date
information viewed in a physical or logical view:
Logical Layout: Shows a schematic tree-layout of the components in the system,
such as: inverters, Power Optimizers, PV arrays, modules, meters, and sensors, as
well as their electrical connectivity. This view enables you to see which modules are
connected in each PV array, which PV arrays are connected to each inverter, and so
on.
Physical Layout: Provides a bird's eye view of the actual placement of modules in
the site and allows pinpoint issues to the exact location of each module on a virtual
site map.
If you do not report the mapping of the installed Power Optimizers, the monitoring
platform will show the logical layout, indicating which Power Optimizers are connected
to which inverter, but will not show PV strings or the physical location of Power
Optimizers.
The monitoring platform includes a built-in help system that guides you through the
monitoring functionality.
For more information, refer to https://www.solaredge.com/products/pv-monitoring#/.
SE330K Inverter P/N: SE330K-xxxxxxxxx
Chapter 5: Activating, Commissioning and Configuring the System 72