Verifying Proper Activation And Commissioning - SolarEdge SE330K Installation Manual

Communication
Communication settings can be configured only after communication connections are
complete.
From the Commissioning menu, select Monitoring Communication > Auto Select.
SetApp will automatically detect your connection method. Follow the on-screen
instructions to complete the configuration and establish communication with the
monitoring platform.
From the Commissioning menu, Select Site Communication to configure
communication between multiple SolarEdge devices or external non SolarEdge
devices, such as batteries or data loggers.
For more information on the Monitoring Platform, refer to the C&I One User Guide
available on the SolarEdge website at:
guide.pdf
Power Control
Power control options are detailed in the Power Control Application Note , available on
the SolarEdge website at:
center.solaredge.com/sites/kc/files/application_note_power_control_configuration.pdf
For P_Q diagram refer to:
center.solaredge.com/sites/kc/files/application_note_power_control_configuration.pdf
NOTE
SolarEdge inverters with "Grid Support" functionality (as marked on the
inverter certification label), are compliant with UL 1741 Supplement B. The
functionality is built into the inverter and no additional external device is
required.

Verifying Proper Activation and Commissioning

1. Select Information and verify that the correct firmware versions are installed on
each inverter.
2. Select Status and verify that inverter is operating. In the SE330K section, under
Server Comm., make sure that S_OK is displayed.
3. Verify that additional configurations were properly set by viewing the relevant
Status screens.
4. Verify that the green inverter LED is steadily lit.
Your SolarEdge power harvesting system is now operational.
SE330K Inverter P/N: SE330K-xxxxxxxxx
Chapter 5: Activating, Commissioning and Configuring the
https://utility.solaredge.com/hub/ci_one_user_
https://knowledge-
https://knowledge-
System 70