Setapp; Installation Tools And Material List - SolarEdge SE330K Installation Manual

Hide thumbs Also See for SE330K:

Table of Contents

SetApp

SolarEdge SetApp is a mobile application developed and designed to simplify the

process of commissioning and configuring SolarEdge inverters and power optimizers

by providing an intuitive and efficient interface for installers.

With SetApp, installers can easily access and configure SolarEdge inverters and power

optimizers through their smartphone or tablet. The user-friendly app guides installers

step-by-step through the entire commissioning process, ensuring that each component

is properly connected and configured for optimal performance. This eliminates the

need for complex manual setup procedures and significantly reduces the time and

effort required for system installation.

Standard tools can be used during the installation of the SolarEdge system.

The following recommended tools are required for installation:

Allen screwdriver for 5mm screw type for the inverter cover, inverter cover screws

Allen screwdriver for M5/M6/M8 screw types

Standard flat-head screwdrivers set

Non-contact Voltage detector

Cordless drill (with a torque clutch) or screwdriver and bits suitable for the surface

on which the inverter and Power Optimizers are installed and for opening the

inverter AC and DC conduit holes. The use of an impact driver is not allowed

Ratchet torque & extension for 25.8 lb*ft / 35 N*m, 13.3 lb*ft /18 N*m

A/F 19 mm ,A/F 17 mm

Torque screwdriver with extension for Allen bits 3.5 lb*ft / 4.7 N*m, 2.9 lb*ft / 3.9

N*m, 1.8 lb*ft / 2.4 N*m, 0.9 lb*ft / 1.2 N*m

Ring terminals crimping tool

Wire cutters

Wire strippers

Multimeter

SE330K Inverter P/N: SE330K-xxxxxxxxx

Table of Contents

SetApp