Immergas 3.033210 Instruction And Warning Book page 41

1.13 PIPE INSTALLATION FOR COMBINATION WITH
SOLAR THERMAL KIT ON MAGIS HERCULES PRO
MINI.
- Disconnect the voltage from the appliance by disconnecting the
switch upstream of the same.
- Remove the appliance casing (see relative instruction booklet).
- Make sure that the cold water inlet cock is closed.
- Partially empty the contents of the storage tank unit by acting on
the appropriate emptying cock (see relative instruction booklet).
To carry out this operation, open any domestic hot water cock
to allow air to enter the storage tank unit.
- Undo the screws (1), replace the plates (2 and 3) with the plate
(4) as indicated in Fig. 15.
- At the end, screw the bolts (1) back on.
1
2
3
Hydraulic connections.
- Remove the cold water inlet pipe (1), the hot water outlet pipe
(2) and the flexible pipe (3).
4
2
15
3
1
16
41 41