TP-Link tapo D230S1 User Manual

Video doorbell camera kit

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

User Guide

Video Doorbell Camera Kit

Table of Contents

Summary of Contents for TP-Link tapo D230S1

Page 2: Table Of Contents
Contents About This Guide ··········································································· 1 Introduction ······················································································ 2 Appearance - Doorbell ······························································· 3 Appearance - Hub ······································································ 4 Charge the Battery ········································································ 7 Insert the Battery ··········································································· 8 Set Up Your Hub and Doorbell ················································ 9 Install a microSD Card ······························································ 11 Installation Tips ············································································...
Page 3: About This Guide
Ignoring this type of note might result in a malfunction or damage to the device. Note: More Info • Specifications can be found on the product page at https://www.tapo.com. • Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. • The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.
Page 4: Introduction
– The rechargeable and removable battery with a low-power protocol extends your usage. △ 180-day battery life is based on TP-Link’s laboratory testing with 10-20 triggered events per day. Actual battery life may vary based on device settings, use, and environmental factors.
Page 5: Appearance - Doorbell
Appearance - Doorbell Front Back SYNC/RESET Button • Press for 1s: Pair with the hub Lens Microphone • Press and hold for about 5s: Reset the doorbell Anti-Theft Button Motion Sensor Status LED When the Anti-Theft Alarm is enabled on the Tapo app, an Indicates the status of your doorbell.
Page 6: Appearance - Hub
Appearance - Hub SYNC Press to pair with the camera, or silence the hub when it rings. RESET Press and hold for about 5 seconds until the hub LED quickly blinks red to reset the hub. microSD Card Slot Insert a microSD card to record camera videos locally. Initialize the microSD card within the Tapo app first.
Page 7 Hub Status LED Solid red Starting up Blinking red and green Ready for setup Solid amber Connected to router Solid green Connected to the cloud Blinking green slowly Pairing Blinking red quickly Hub resetting Blinking green quickly Hub updating...
Page 8 Doorbell Status LED Solid Red Starting up Blinking red and green Ready for pairing Blinking green slowly Pairing Solid amber Connected to the hub Solid green Connected to the cloud Blinking red quickly Doorbell resetting Blinking green quickly Doorbell updating Blinking red once a minute Low battery Blinking red slowly...
Page 9: Charge The Battery
Charge the Battery Connect the battery to a power source. 5V USB Charger Charging: Solid amber Fully charged: Solid green Notes: 1. Charge the battery before use. This will take about 5~6 hours. 2. If you want to use the doorbell while charging the battery, we recommend purchasing another battery for your convenience.
Page 10: Insert The Battery
Insert the Battery 1. Use a pin to detach the doorbell. 2. Insert the charged battery.
Page 11: Set Up Your Hub And Doorbell
Step 3. Add Your Hub First Get the Tapo app from the App Store or Open the app, and log in with your TP-Link ID. Tap the button in the app and select your Google Play, or by scanning the QR code If you don't have an account, create one first.
Page 12 Step 4. Add Your Doorbell Tap the button in the app and select your model. Follow app instructions to set up your doorbell.
Page 13: Install A Microsd Card
Install a microSD Card If you want the camera to record videos locally, insert a microSD card to your hub. Initialize the microSD card within the Tapo app. You can go to Camera Settings > microSD Card in the Tapo app to check the card status or format your card.
Page 14: Installation Tips
Installation Tips Before you install the doorbell, read the installation tips below. 1. Install the doorbell on a flat wall. 2. The doorbell should be placed 1.2 m (4 ft) above the ground. 3. Use the included 15° mounting wedge for a more focused view from a specific side. Without Mounting Wedge 15°...
Page 15: Install Your Doorbell
Install Your Doorbell When you finish adding your doorbell in the Tapo app, you can stick your doorbell to a clean wall with the included adhesive, or mount it on a wall with the provided mounting template and screws. Option 1. Stick to a clean wall 2.
Page 16 Option 2. Mount to the wall (Optional) Use 15° Mounting Wedge to Adjust Angle 1. Stick the mounting template to the desired mounting place. Drill two holes according to the template. To adjust the viewing angle of the doorbell, you can use the 15° mounting wedge within the package.
Page 17: Authentication
Authentication FCC compliance information statement Product Name: Video Doorbell Camera Kit Model Number: Tapo D230S1 Component Name Model AC ADAPTER T090085-2B1 USB ADAPTER A8-501000 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 926181 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com...
Page 18 We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Page 19 We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Page 20 The device complies with RF specifications when the device used at 20 cm from your body. UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
Page 21 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
Page 22 BSMI Notice 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。限用物質含有情況標示聲明書設備名稱：Video Doorbell Camera Kit 型號（型式）：Tapo D230S1 Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 單元多溴二苯醚鉛汞鎘六價鉻...
Page 23 備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值 Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Page 24 • Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress. • Do not use liquid to clean the product. Only use a dry cloth. • Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician. •...
Page 25 Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Page 26 Explanation of the symbols on the product label Explanation of the symbols on the product label Symbols may vary from products Symbols may vary from products Symbol Symbol Explanation Explanation Class II equipment Class II equipment Class II equipment with functional earthing Class II equipment with functional earthing Alternating current Alternating current...
Page 27 Symbol Explanation Functional earthing Caution, hot surface Caution Operator’s manual Stand-by “ON”/”OFF” (push-push) Fuse Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
Page 28 Symbol Explanation Switch of mini-gap construction Switch of micro-gap construction (for US version) µ Switch of micro-gap / micro-disconnection construction (for other versions except US) ε Switch without contact gap (Semiconductor switching device)