Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Strongway 49508
- Page 1 Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #s 49508, 49509, 49521, 49522 SAVE THESE INSTRUCTIONS...
- Page 2 Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
-
Page 3: Table Of Contents
Table of Contents Intended Use ............................ 4 Technical Specifications ......................... 4 Important Safety Information ......................5 Assembly ............................7 Before Each Use ..........................8 Operating Instructions ........................8 After Each Use ..........................10 Maintenance........................... 11 Parts Diagram ..........................11 Parts List ............................12 Troubleshooting .......................... -
Page 4: Intended Use
The sprinklers include brass sprinkler heads with 2-5 nozzles to match sprinkler output with water supply capability. The heads can be set to a full- or partial-circle water spray pattern. Technical Specifications 49508, 3/4” Sprinkler Property Specification 8” Heavy Poly Tires Wheel 3/4”... -
Page 5: Important Safety Information
Important Safety Information • Read and understand all instructions before using this tool. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment. • The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. - Page 6 WORK AREA SAFETY • Do not allow the sprinkler to come into contact with an electrical source. It is not insulated and contact will cause electrical shock. • Be aware of all power lines, electrical circuits and mechanical hazards in the area. PERSONAL SAFETY •...
-
Page 7: Assembly
Assembly 1. Slide both wheels (7) onto the axle (6) and fasten the wheels using washers, pins and caps (1 - 3). 49508 49509 & 49521 49522 2. Attach the water pipe (4) to the axle (6) with the two 40*8mm bolts & nuts (8). -
Page 8: Before Each Use
• Minimize distractions in the environment. Distractions can cause loss of control of the sprinkler. 49508, 3/4” Sprinkler The sprinkler head is a fully adjustable sprinkler that will operate in a full circle pattern or any part of a circle by adjusting the stops at the base of the sprinkler. Refer to the instructions below to set sprinkler head to the desired operating pattern. - Page 9 49509, 1” Sprinkler The sprinkler head is a fully adjustable sprinkler that will operate in a full circle pattern or any part of a circle pattern by adjusting the stops at the base of the head. Refer to the instructions below to set the sprinkler head to the desired operating pattern.
-
Page 10: After Each Use
49521/49522, 1-1/4” Sprinkler The sprinkler head is a fully adjustable sprinkler that will operate in a full circle pattern or any part of a circle pattern by adjusting the stops at the base of the head. Refer to the instructions below to set sprinkler head to the desired operating pattern. -
Page 11: Maintenance
Maintenance Maintain your tool. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual. ⚫... -
Page 12: Parts List
3/4" Sprinkler Head (49508) 1" Sprinkler Head (49509) 1-1/4" Sprinkler Head (49521 & 49522) Axle 8" Heavy Poly Tires (49508) 8” Solid Rubber Tires (49509 & 49521) 10” Flat-Free Tires (49522) 8*40mm Bolt & Nut (49508) 8*55mm Bolt & Nut (49509, 49521, & 49522) -
Page 13: Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. - Page 14 Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.com Made in Vietnam Page 14 of 14...