Advertisement
Quick Links
Advertisement
Summary of Contents for Moen Depth
- Page 1 user manual Firmware Version: 1.0.2...
-
Page 2: Table Of Contents
Introduction Table of contents Thank you for choosing Depth. Without Depth has been tested up to 150 meters Safety you, Depth wouldn’t exist. Depth is a fully and is ready for any adventure you throw Device Care wireless underwater music player and at it. -
Page 3: Safety
It is crucial to blackout. understand and respect the limitations of this Depth’s Freediving features are only for use by Depth is not designed to be used as device to ensure your safety and the safety of certified freedivers. -
Page 4: Device Care
60°C. mask clip interface rails and a pressure sensor button - Never leave Depth in the sun or a hot sensor grill. car for extended periods. - Never dive below 150m with Depth. Its casing conducts vibrations from an - Never drop Depth. - Page 5 Depth can be charged by placing it on There are two ways of providing input to a Qi-compatible wireless charging pad. Depth, pressing the multifunction button Ensure you place Depth directly in the and tapping. center of its charging pad with the logo facing down.
-
Page 6: How To Wear
Mask Strap Clip The multifunction button is programmed Depth is designed to be worn on the to detect single, double and triple side of your head near one of your ears. presses. It also detects short holds (3 There are two main ways to wear Depth, seconds) and long holds (7 seconds). - Page 7 AND LANYARD modes Depth can be mounted on your mask Depth has 4 modes it can cycle through. strap with the included mask strap clip. - Sleep Mode: Default power-saving For additional security, use the included mode. lanyard to tether Depth to the mask - Freedive Mode: Receive spoken strap.
- Page 8 Sleep mode Freedive mode Depth will be in Sleep Mode most of Sleep Mode Button Mapping Freedive Mode will automatically activate 15 minutes without going below 1.5 meters the time to conserve battery. Depth will when you dive below 1.5 meters for 5 will result in Depth going to sleep.
- Page 9 Algorithm A Depth automatically keeps track of your You perform a freedive and a few seconds If max depth is less than 25m, then surface surface interval after each dive and can They can be individually toggled in the after you reach the surface, Depth’s vocal interval = 2 x dive time.
- Page 10 When you activate the Stopwatch, seconds). On Algorithm A, your surface Depth once. Depth will tell you the time elapsed in interval will be doubled to 2 minutes and Algorithm D 10-second intervals until you dive below If max depth is less than 25m, then 30 seconds (150 seconds).
- Page 11 - 1 press: increase volume - 1 tap: replay surface notifications Depth can be configured to notify you Depth can be configured to notify you at 3 at 3 different target depths during your different target depths during your ascent...
- Page 12 10 meters or 20 meters). seconds or 60 seconds. notification to 47 seconds. Example: You set the Time Interval At 47 seconds into your dive, Depth’s notification to every 30 seconds and dive vocal assistant will say: “47” for 80 seconds. Depth’s vocal assistant...
- Page 13 During part of your set a target speed and be notified when - 2 presses: decrease volume - 2 taps: play current Depth descent, you speed up to .7 meters/ they reach that speed for longer than 3 second.
- Page 14 By default, all freedives are logged at 2 samples per second (2hz). But dive - 2 presses: switch to Music Mode Depth Connect is used to save and share logging can be configured to 4 or 8 dive logs, configure Depth’s settings and samples per second.
- Page 15 1.5m. This is Music Mode. useful if you only want to use Depth - 3 presses: switch to Freedive Mode - 3 taps: increase volume as an underwater music player.
-
Page 16: Mobile App
“Depth Connect” on the Apple App for 3 seconds, then open the app Store or Google Play. - Select Depth from the device list, it will be listed as “Depth Dive Computer”. If Depth fails to appear, try restarting the app. - Page 17 Mobile app Firmware Update: Divelog Sync: Whenever a new firmware version is available for Depth, you will receive an Once Depth successfully pairs with Depth in-app notification prompting you to Connect, all recorded dive logs will be download the update.
- Page 18 1 hour for a full charge device is in 150 meters Bluetooth Pairing Mode Dive Log Rate Case Material If Depth still fails to appear, restart the 2, 4 or 8 times per second (2Hz, 4Hz, or 8Hz) app and reboot your Depth unit. Polymer...
-
Page 19: Recycling
If your Depth unit sustains repairable You may dispose of the product when defects in material and workmanship. damage, you can send it to Depth Diving its service life has ended, please recycle This warranty does not cover damage and a technician will repair it for a... -
Page 20: Team Signoff
@Depth.Diving project into something the whole community can enjoy. We couldn’t be more excited to see where Depth goes from here and we’re glad you’re along for the ride. -The Depth Team... - Page 21 Designed in California Kelp Forests...