Enable Or Disable Mu-Mimo - NETGEAR Nighthawk RS700 User Manual

8. Select the Turn off wireless signal by schedule check box for the radio to activate
the schedule.
Selecting this check box enables all WiFi schedules for the radio radio and clearing
this check box disables all WiFi schedules for the radio. By default, no WiFi schedule
is set up and the check box is disabled.
9. Click the Apply button.
Your settings are saved.

Enable or disable MU-MIMO

Multiuser multiple input, multiple output (MU-MIMO) improves performance when many
WiFi clients that are MU-MIMO-capable transfer data at the same time. For MU-MIMO
to function, WiFi clients must support MU-MIMO (some older devices do not), and they
must be connected to the 5 GHz WiFi band. This feature is enabled by default, but you
can disable it.
To enable or disable MU-MIMO:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll down and select or clear the Enable MU-MIMO check box.
Selecting this check box enables MU-MIMO (the default setting). Clearing this check
box disables MU-MIMO.
6. Click the Apply button.
Your settings are saved.
Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
88 User Manual