NETGEAR Nighthawk RS700 User Manual page 65

The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Click the View list of allowed devices not currently connected to the network
link.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected but allowed to access the network.
In the following steps, we refer to the list of allowed devices not currently connected
to the network as the list of allowed devices.
6. To add a device to the list of allowed devices, do the following:
a. Click the Add button.
The Add Allowed Device page displays.
b. Enter the MAC address and device name for the device that you want to allow.
c. On the Add Allowed Device page, click the Apply button.
The device is added to the list of allowed devices.
7. To remove a device from the list of allowed devices, do the following:
a. Select the check box for the device.
b. Click the Remove from the list button.
The device is removed from the list of allowed devices.
8. To change the device status by blocking access for a device on the list of allowed
devices, do the following:
a. Select the check box for the device.
b. Click the Edit button.
The Edit Device Name page displays.
c. From the Access Control menu, selected Block.
d. On the Edit Device Name page, click the Apply button.
The device is moved to the list of blocked devices not currently connected to the
network.
Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700
65 User Manual