Set A 6Rd Ipv6 Internet Connection - NETGEAR Nighthawk RS700 User Manual

Wifi 7 tri-band router
Table of Contents

Advertisement

This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
11. (Optional) Select the Use This Interface ID check box and specify the interface ID
to be used for the IPv6 address of the router's LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
12. Click the Apply button.
Your settings are saved.

Set a 6rd IPv6 Internet connection

The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider's
IPv4 network. 6rd uses the service provider's own IPv6 address prefix. This limits the
operational domain of 6rd to the service provider's network and is under direct control
of the service provider. The IPv6 service provided is equivalent to native IPv6. The 6rd
mechanism relies on an algorithmic mapping between the IPv6 and IPv4 addresses that
are assigned for use within the service provider's network. This mapping allows for
automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing stateless
operation of 6rd.
With a 6rd tunnel configuration, the router follows the RFC5969 standard, supporting
two ways to establish a 6rd tunnel IPv6 WAN connection:
• Auto Detect mode: In IPv6 Auto Detect mode, when the router receives option 212
from the DHCPv4 option, autodetect selects the IPv6 as 6rd tunnel setting. The router
uses the 6rd option information to establish the 6rd connection. For more information,
see Use auto detect for an IPv6 Internet connection on page 44.
• Manual mode: In 6rd mode, if the router receives option 212, the fields are
automatically completed. Otherwise, you must enter the 6rd settings.
To set a 6rd IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
Specify Your Internet Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
55
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nighthawk rs700s

Table of Contents