Change A Port Forwarding Rule - NETGEAR Nighthawk RS700 User Manual

6. Leave the Port Forwarding radio button selected as the service type.
7. Click the Add Custom Service button.
The Ports - Custom Services page displays.
8. In the Service Name field, enter a descriptive name.
9. From the Protocol menu, select the protocol.
If you are unsure, select TCP/UDP.
10. In the External Port Range field, enter the port range.
You can specify ports and port ranges divided by commas, for example: 30, 50–60,
65500–65510.
11. Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Type the port numbers in the Internal Port Range field.
You can enter a port range and fixed ports in one rule, for example: external
(30–50, 78, 100–102), internal (40–60, 99, 200–202). With this rule, external ports
30–50 are forwarded to internal ports 40–60.
12. In the Internal IP address field, type the IP address or select the radio button for an
attached device listed in the table.
13. Click the Apply button.
Your settings are saved. The service or application is now in the list on the Port
Forwarding / Port Triggering page.

Change a port forwarding rule

You can change an existing port forwarding rule.
To change a port forwarding rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
Manage Port Forwarding and
Port Triggering
Nighthawk WiFi 7 Tri-Band Router Model RS700
189 User Manual